|
|
Mordel's Bar & Grill |
|
 |
» |
View previous topic :: View next topic |
Author |
Message |
Kirbanzo ComStar Corporal

Joined: 17-Apr-2025 16:17 Posts: 99
|
Posted: 07-May-2025 22:19 Post subject: Linebarrel LBR-1L |
|
|
TRO: Linebarrel LBR-1L | BattleMech Technical Readout
Name/Model: Linebarrel LBR-1L
Designer: Kirbanzo
Source(s): Custom Mordel.Net Units
Technology: Inner Sphere
Technology Rating: D
Tonnage: 90
Role: Brawler
Configuration: Biped BattleMech
Era/Year: Star League / 2485
Rules (Current): Introductory
Rules (Era): Introductory
Rules (Year): Introductory
Total Cost: 9,041,530 C-Bills
Battle Value: 1,355
Chassis: Kepler 90A
Power Plant: Ceres Motors 360
Walking Speed: 43.2 kph
Maximum Speed: 64.8 kph
Jump Jets: Pitban 3000
Jump Capacity: 60 meters
Armor: Kepler Ablative Ceramosteel
Armament:
1 Kepler 15-Bolt LRM 15
1 Kepler 120mm Autocannon/10
2 Firmir Standard Medium Lasers
2 Firmir LaserLite Small Lasers
Manufacturer: Kepler Defense Group
Primary Factory: Calpaca
Communications: CeresCom Model 4-B
Targeting & Tracking: Kepler AimScope 1.8
================================================================================================
Overview:
One of the first homegrown Capellan Confederation 'Mech designs, the Linebarrel was the
entry point of Calpaca's Kepler Defense Industries into the market of BattleMechs. Meant to
be a heavy brawler that could take a good amount of punishment while having plenty to give
back, it was built to be placed squarely in the emerging assault weight class while having
surprising mobilty for something of its tonnage.
Capabilities:
The 90-ton Linebarrel is built on K.D.I.'s first ever 'Mech chassis, the Kepler 90A, which
supports a Ceres Motors 360 fusion engine and 10 tons of Kepler Ablative Ceramosteel
plating. While relatively light protection for an assault-class, it was justified as being
in line with most 'Mechs in the emerging brawler archetype. It also has two Pitban 3000 Jump
Jets on its back for clearing obstacles, as well as slowing falls if it has to make a
perilous leap. As for its electronics, a CeresCom Model 4-B handes communications, while an
in-house Kepler AimScope 1.8 handles targeting and tracking.
The primary weapon of the Linebarrel 1L is a Kepler 120mm Autocannon/10 with one ton of
ammo, providing 10 shots before requiring external reloading. It also has a Kepler 15-Bolt
LRM-15, which itself has one ton of ammo - while generally considered insufficient, the
weapon was not meant to be fired often according to the 'Mech's design documentation and
thus such a deficiency was considered acceptable. Finally, for ammo-independent backup
weapons, it has two Fimir Standard Medium Lasers and two Firmir LaserLite Small Lasers. 13
standard heat sinks are used to cool this package.
The Linebarrel is designed to not need maintenance nearly as often as other 'Mechs, but as
part of this the Autocannon's mechansims were simplified to the point that it could not
hotswap ammunition even if the Linebarrel itself was modified to carry more than one ton and
also suffered from having less protection due to bulkier components.
DESIGN QUIRKS: Rugged (2), Static Ammo Feed(AC/10), Exposed Weapon Linkage (AC/10)
================================================================================================
Equipment Mass
------------------------------------------------------------------------------------------------
Internal Structure: Standard 9.00
Engine: 360 Fusion 33.00
Walking MP: 4
Running MP: 6
Jumping MP: 2
Heat Sinks (Single): 13 3.00
Gyro: Standard 4.00
Cockpit: Standard 3.00
Armor Factor: 160 10.00
Type: Standard
Internal Armor
Structure Value
Head: 3 9
Center Torso: 29 20
Center Torso (rear): 5
R/L Torso: 19 20
R/L Torso (rear): 5
R/L Arm: 15 19
R/L Leg: 19 19
================================================================================================
Weapons and Ammo Location Critical Tonnage
------------------------------------------------------------------------------------------------
Jump Jet RT 1 2.00
LRM 15 RT 3 7.00
LRM 15 (Ammo 8) RT 1 1.00
Autocannon/10 (Ammo 10) LT 1 1.00
Jump Jet LT 1 2.00
2 Medium Lasers RA 2 2.00
Autocannon/10 LA 7 12.00
2 Small Lasers LA 2 1.00
================================================================================================
Alpha Strike Statistics
------------------------------------------------------------------------------------------------
Point Value (PV): 33
TP: BM, SZ: 4, TMM: 1, MV: 8"/4"j
Damage: (S) 3 / (M) 3 / (L) 1, OV: 0
Armor (A): 5, Structure (S): 7
Specials: IF1, JMPW1
|
|
|
Back to top |
|
Kirbanzo ComStar Corporal

Joined: 17-Apr-2025 16:17 Posts: 99
|
Posted: 07-May-2025 22:22 Post subject: Linebarrel LBR-1L |
|
|
TRO: Linebarrel LBR-1L | BattleMech Technical Readout
Name/Model: Linebarrel LBR-1L
Designer: Kirbanzo
Source(s): Custom Mordel.Net Units
Technology: Inner Sphere
Technology Rating: D
Tonnage: 90
Role: Brawler
Configuration: Biped BattleMech
Era/Year: Star League / 2485
Rules (Current): Introductory
Rules (Era): Introductory
Rules (Year): Introductory
Total Cost: 9,041,530 C-Bills
Battle Value: 1,355
Chassis: Kepler 90A
Power Plant: Ceres Motors 360
Walking Speed: 43.2 kph
Maximum Speed: 64.8 kph
Jump Jets: Pitban 3000
Jump Capacity: 60 meters
Armor: Kepler Ablative Ceramosteel
Armament:
1 Kepler 15-Bolt LRM 15
1 Kepler 120mm Autocannon/10
2 Firmir Standard Medium Lasers
2 Firmir LaserLite Small Lasers
Manufacturer: Kepler Defense Group
Primary Factory: Calpaca
Communications: CeresCom Model 4-B
Targeting & Tracking: Kepler AimScope 1.8
================================================================================================
Overview:
One of the first homegrown Capellan Confederation 'Mech designs, the Linebarrel was the
entry point of Calpaca's Kepler Defense Group into the market of BattleMechs in 2485. Meant
to be a heavy brawler that could take a good amount of punishment while having plenty to
give back, it was built to be placed squarely in the emerging assault weight class while
having surprising mobility for something of its tonnage.
Capabilities:
The 90-ton Linebarrel is built on K.D.G.'s first ever 'Mech chassis, the Kepler 90A, which
supports a Ceres Motors 360 fusion engine and 10 tons of Kepler Ablative Ceramosteel
plating. While relatively light protection for an assault-class, it was justified as being
in line with most 'Mechs in the emerging brawler archetype. It also has two Pitban 3000 Jump
Jets on its back for clearing obstacles, as well as slowing falls if it has to make a
perilous leap. As for its electronics, a CeresCom Model 4-B handes communications, while an
in-house Kepler AimScope 1.8 handles targeting and tracking.
The primary weapon of the Linebarrel 1L is a Kepler 120mm Autocannon/10 with one ton of
ammo, providing 10 shots before requiring external reloading. It also has a Kepler 15-Bolt
LRM-15, which itself has one ton of ammo - while generally considered insufficient, the
weapon was not meant to be fired often according to the 'Mech's design documentation and
thus such a deficiency was considered acceptable. Finally, for ammo-independent backup
weapons, it has two Fimir Standard Medium Lasers and two Firmir LaserLite Small Lasers. 13
standard heat sinks are used to cool this package.
The Linebarrel is designed to not need maintenance nearly as often as other 'Mechs, but as
part of this the Autocannon's mechansims were simplified to the point that it could not
hotswap ammunition even if the Linebarrel itself was modified to carry more than one ton and
also suffered from having less protection due to bulkier components.
DESIGN QUIRKS: Rugged (2), Static Ammo Feed(AC/10), Exposed Weapon Linkage (AC/10)
================================================================================================
Equipment Mass
------------------------------------------------------------------------------------------------
Internal Structure: Standard 9.00
Engine: 360 Fusion 33.00
Walking MP: 4
Running MP: 6
Jumping MP: 2
Heat Sinks (Single): 13 3.00
Gyro: Standard 4.00
Cockpit: Standard 3.00
Armor Factor: 160 10.00
Type: Standard
Internal Armor
Structure Value
Head: 3 9
Center Torso: 29 20
Center Torso (rear): 5
R/L Torso: 19 20
R/L Torso (rear): 5
R/L Arm: 15 19
R/L Leg: 19 19
================================================================================================
Weapons and Ammo Location Critical Tonnage
------------------------------------------------------------------------------------------------
Jump Jet RT 1 2.00
LRM 15 RT 3 7.00
LRM 15 (Ammo 8) RT 1 1.00
Autocannon/10 (Ammo 10) LT 1 1.00
Jump Jet LT 1 2.00
2 Medium Lasers RA 2 2.00
Autocannon/10 LA 7 12.00
2 Small Lasers LA 2 1.00
================================================================================================
Alpha Strike Statistics
------------------------------------------------------------------------------------------------
Point Value (PV): 33
TP: BM, SZ: 4, TMM: 1, MV: 8"/4"j
Damage: (S) 3 / (M) 3 / (L) 1, OV: 0
Armor (A): 5, Structure (S): 7
Specials: IF1, JMPW1
|
|
|
Back to top |
|
Kirbanzo ComStar Corporal

Joined: 17-Apr-2025 16:17 Posts: 99
|
Posted: 09-May-2025 14:09 Post subject: Linebarrel LBR-1L |
|
|
TRO: Linebarrel LBR-1L | BattleMech Technical Readout
Name/Model: Linebarrel LBR-1L
Designer: Kirbanzo
Source(s): Custom Mordel.Net Units
Technology: Inner Sphere (Primitive)
Technology Rating: D
Tonnage: 90
Role: Brawler
Configuration: Biped BattleMech
Era/Year: Star League / 2484
Rules (Current): Advanced (Extinct)
Rules (Era): Advanced
Rules (Year): Advanced
Total Cost: 8,428,780 C-Bills
Battle Value: 1,269
Chassis: Kepler 90AX Primitive
Power Plant: Ceres Motors 325 Primitive Fusion
Walking Speed: 32.4 kph
Maximum Speed: 54 kph
Jump Jets: Pitban 3000
Jump Capacity: 60 meters
Armor: Kepler Ceramosteel Primitive
Armament:
1 Kepler 15-Bolt LRM 15
1 Kepler 120mm Autocannon/10
2 Firmir Standard Medium Lasers
2 Firmir LaserLite Small Lasers
1 Kepler .60-Gatling Machine Gun
Manufacturer: Kepler Defense Group
Primary Factory: Calpaca
Communications: CeresCom Model 2-Rs
Targeting & Tracking: Kepler AimScope 1.2
================================================================================================
Overview:
One of the first homegrown Capellan Confederation 'Mech designs, the Linebarrel was the
entry point of Calpaca's Kepler Defense Group into the market of BattleMechs in 2485. Meant
to be a heavy brawler that could take a good amount of punishment while having plenty to
give back, it was built to be placed squarely in the emerging assault weight class while
having surprising mobility for something of its tonnage.
Capabilities:
The 90-ton primitive Linebarrel 1L is built on K.D.G.'s first ever 'Mech chassis, the Kepler
90AX primitve, which supports a Ceres Motors 270 primitive fusion engine and 14.5 tons of
Kepler Ceramosteel primitive armor plating. While relatively light protection for an
assault-class, it was justified as being in line with most 'Mechs in the emerging brawler
archetype. It also has two Pitban 3000 JumpJets on its back for clearing obstacles, as well
as slowing falls if it has to make a perilous leap. As for its electronics, a CeresCom Model
2-Rs handes communications, while an in-house Kepler AimScope 1.2 handles targeting and
tracking.
The primary weapon of the Linebarrel 1L is a Kepler 120mm Autocannon/10 with two tons of
ammo, providing 20 shots before requiring external reloading. It also has a Kepler 15-Bolt
LRM-15, which itself has two tons of ammo. Finally, for ammo-independent backup weapons, it
has two Fimir Standard Medium Lasers and two Firmir LaserLite Small Lasers, while for
infantry a head-mounted Kepler .60 Gatling Machine Gun is installed with a single ton of
ammo. 13 standard heat sinks are used to cool this package.
The Linebarrel is designed to not need maintenance nearly as often as other 'Mechs, but as
part of this the Autocannon's mechansims were simplified to the point that it could not
hotswap ammunition even if the Linebarrel itself was modified to carry more than one ton and
also suffered from having less protection due to bulkier components.
DESIGN QUIRKS: Rugged (2), Static Ammo Feed(AC/10), Exposed Weapon Linkage (AC/10)
================================================================================================
Equipment Mass
------------------------------------------------------------------------------------------------
Internal Structure: Primitive 9.00
Engine: 325 Primitive Fusion 23.50
Walking MP: 3
Running MP: 5
Jumping MP: 2
Heat Sinks (Single): 13 3.00
Gyro: Primitive 4.00
Cockpit: Primitive 5.00
Armor Factor: 155 14.50
Type: Primitive
Internal Armor
Structure Value
Head: 3 9
Center Torso: 29 20
Center Torso (rear): 4
R/L Torso: 19 19
R/L Torso (rear): 4
R/L Arm: 15 19
R/L Leg: 19 19
================================================================================================
Weapons and Ammo Location Critical Tonnage
------------------------------------------------------------------------------------------------
Machine Gun H 1 0.50
Machine Gun (Ammo 100) CT 1 0.50
Jump Jet RT 1 2.00
LRM 15 RT 3 7.00
LRM 15 (Ammo 16) RT 2 2.00
Autocannon/10 (Ammo 20) LT 2 2.00
Jump Jet LT 1 2.00
2 Medium Lasers RA 2 2.00
Autocannon/10 LA 7 12.00
2 Small Lasers LA 2 1.00
================================================================================================
Alpha Strike Statistics
------------------------------------------------------------------------------------------------
Point Value (PV): 33
TP: BM, SZ: 4, TMM: 1, MV: 6"/4"j
Damage: (S) 3 / (M) 3 / (L) 1, OV: 0
Armor (A): 5, Structure (S): 7
Specials: IF1, JMPW1
|
|
|
Back to top |
|
Kirbanzo ComStar Corporal

Joined: 17-Apr-2025 16:17 Posts: 99
|
Posted: 09-May-2025 14:25 Post subject: Linebarrel LBR-1L |
|
|
Changed this to be PrimTech. The original is now the LBR-3L.
|
|
Back to top |
|
|
 |
» |
All times are GMT-04:00 |
|
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum You cannot attach files in this forum You can download files in this forum
|
|
|
|
|
|